Holes are a pretty straightforward feature type, but different hole types - such as tapped holes and thread callouts - will require different machine settings. Tip: After you generate toolpaths, run simulations to view the results and make sure your features will be machined properly! If configured correctly, SolidWorks CAM should recognize bosses this way when you click “Extract Machinable Features.” Regular bosses are rectangular features that can be machined as islands inside of pockets. Enter the value to match the chamfer (e.g., 45°) and check “Taper outward” before finishing the feature. After creating the main pocket feature, create a second one and activate the “Side Taper” option. With a few tweaks to custom features, you can define chamfers by using two pocket features. ChamfersĪ chamfer is when the machine cuts away to produce a sloping edge. In SolidWorks CAM, this is done with a specific type of feature called “open pockets.” Open pockets are perfect for situations when you need to machine out to the edges of the part. If your part has an extrude, you’ll need to machine away all the material around it in order to produce it. Checking the 2.5 Axis Feature Type will be a common procedure when working with these features! Open Pockets Make sure to select “Face Feature” as the type, and then define the plane to machine up to. Tip: If SolidWorks CAM doesn’t recognize your face feature, right click on “Mill Part Setup” and then choose the “2.5 Axis Feature” in the dropdown menu.
It is commonly used to machine down the stock to the top-most planar face of the part itself. A face feature is a planar face that is parallel to the mill part setup.
0 kommentar(er)
